How to Clean a PUR Water Filter – Quick & Easy Tips

Do you want to know how to clean a PUR water filter? If yes, then here we have a quick guide for you to clean your water filter.

To have a healthy lifestyle, it is extremely important to drink clean and properly filtered water. And properly filtered water is possible if your house kitchenware is already installed with a high-quality water filter. When it comes to a reliable water filter model, we have the best recommendation for a PUR water filter. Also, I will explain to you how to clean a PUR water filter?

PUR water filter offers your family healthy and clean drinking water free from all impurities and contaminants. But as the water filter is protecting your body from all germs, it is equally important that you maintain the cleanliness of the PUR water filter as well.

If you are using any filter for the first time, you should know the rule of replacement. Every single water filter model will demand the replacement of the faucet after a certain period. For the faucet filter, the period of changing the filter is around 4-5 months. Not changing the filter at the right time will make you drink dirty water.

Replacement of the filter will be based on the fact that for how long time you will use the filter. If you are using the filter daily, then it is obvious that you have to change it after two months.

Sometimes the period might vary according to the water filter model you are using. Most of the brands have the capacity where the filter model can survive for long years. Once you buy the PUR water filter, make sure you read the manual guide carefully. This will enable you to learn about how long you have to change the faucet water filter.

It is highly recommended to change the filter after every month. Cleaning it on a monthly basis will also improve the flow of water. Some people might overlook cleaning the water filter because it is an intricate process to handle.

In just a matter of 15 minutes, you will be all done with the cleaning process.

The majority of the faucet water filters are available with a filter change sensor. This sensor will indicate your model with various color signals. These coloration signals will guide you to the accurate cleaning time or even if your filter demands a replacement.

Step by Step Guide on How to Clean PUR Water Filter

No doubt, PUR is known as one of the best brands in the market. They are excellent when it comes to producing the best quality filter models with high performance. Not just the filters, but they have made a huge name by producing water pitchers and much more.

The reason why the PUR water filter is becoming so much popular is due to its easy installation and being affordable. For installing the PUR, there is no need to do any extra hard work. All you have to do is to connect the water faucet aerator and tightly attach it with the plier or wrench.

Now without wasting any time, here we have a step-by-step guide for you to help you with the PUR water filter’s proper cleanliness. Let’s have a look below:

  • Step No 1:

First of all, you have to clean the water filter by removing the filter model’s faucet. For removing it, you need to twist off the cover out of the water filter.

  • Step No 2:

Once you have removed the PUR water filter faucet, you are now left with two choices. You can either look for the latest faucet water filter model, or you can even clean it. It would be best if you were careful when selecting the best faucet water filter to make it suited for your daily use.

If you do not have the appropriate budget to buy a new filter, then cleaning the old one is the best option left behind. Purchasing a new filter is important when you have not cleaned the water filter for the past four months. Three months is the approximate period in which it is mandatory to change an old water filter.

  • Step No 3:

The next step of the process is about the cleaning of the canister. For cleaning the canister, you have to use vinegar. Vinegar will clean it properly. Once the washing has been ended, you have to put the filter under the water for at least 10 seconds. This will eventually help your filter to get free from the rest of the debris.

  • Step No 4:

The last step is about the installation of the PUR water filter to the faucet. To figure out if the water filter has been installed properly and is working, run the water through it.

How to Clean PUR Water Filter Pitch/Dispenser?

Do you want to know how to clean the PUR water filter pitcher? There is no such secret that the PUR’s pitcher filters are yet prone to clogging. As you use it for a couple of days, you will experience that there is a drop in the flow rate, which ends the whole filtration process be painfully slow.

There are possibly two main explanations for it:

  • According to PUR, the air pockets or the bubbles have trapped into the filter. You can easily have it tested by putting it into the water-filled bowl and see how it floats.
  • Small Styrofoam balls mixed into the activated carbon media have al obstructed the holes of the pleated filtering element at the bottom. This is where the water is supposed to flow out.

The best solution to know how to clean PUR water dispenser falls into various prospects. You have to shake the cartridge for a maximum of 5 to 6 seconds by holding it upside down at any of the slight angles. Are you able to listen to the movement of carbon inside it? If this is not helpful, you can tap it all against the hard surface over a couple of times.

You have to put the cartridge back inside the water to see if it still floats. If it is sinking, you have to pop it back into the pitcher or dispenser. This will improve the flow rate as well. If the cartridge has continued to float, repeat the shaking and tapping again.

How to Remove PUR Water Filter from Faucet

If you feel any problem arising in the PUR water filter, then the filter’s replacement is the best option that the experts recommend. The replacement period differs from one model of filter to another. As soon as the light blinks, this is how you will get to know that this is the time to change the filter.

Follow the below PUR water filter instructions for changing the faucet water filter:

  • Two buttons are located on the PUR faucet water filter.
  • Just squeeze both of them and pull it right off.
  • Now when you press these buttons filter will come out from the faucet.

Final Words

We hope that with this guide you must have learned a lot about how to clean a PUR water filter and its easy removal process. There is no need to imply any scientific rule for the cleaning process. Just remove the faucet aerator and start the cleanliness which will probably end up in just 15 minutes.

Are you ready for it?

Hi, I am Alex running a small team of writers in bringing you Water Filter Insight to do complete market research for buying the best water filters. I am very much conscious of finding the right product for your household.

Leave a Comment